> 產品中心
 
< direction=up scrollamount=1 scrolldelay=50 width=95% height=217 style="padding:0px;line-height:150%" onmouseover=stop() onmouseout=start()>

    成都AG8亚游商貿有限公司成立餘2008年,是一家以器材銷售、工程設計、安裝調試、設備租賃為一體的專業音響銷售工程公司。主要從事演播室、會議廳、歌舞廳、多功能廳、影劇院、體育館的音響設計、安裝調試及設備供應和租賃等業務。

    本公司積極拓展中國市場,在中國大陸西部地區,成都AG8亚游商貿有限公司為甲方客戶提供了一流的設計及安裝調試,並在當地同行業中樹立了典範之形象案例。

PRX718X LF

 

The JBL PRX718XLF Powered PA Subwoofer delivers your bass with accuracy and power. Ideal as a single sub in a sub/sat system or in multiples in a scalable, large-format SR system, the PRX718XLF performs with amazing efficiency. Stackable and lightweight for quick setups and teardowns, this sub's rugged construction lets it stand up to busy pro touring schedules. A 1500 Watt Class D amplifier powers a JBL Differential Drive dual-voice-coil 18" woofer, while sophisticated DSP gives you crossover functionality, polarity optimization, protection, dynamic limiting, and component optimization. Do your low end right, with the JBL PRX718XLF.

JBL PRX718XLF Features at a Glance:
  • 18" Differential Drive low-frequency driver for low distortion and high SPL
  • 1500W of Class-D power; 134dB peak SPL
  • DSP input-limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
  • Integrated stereo pass-thru, with selectable HP filter, and polarity reverse
  • Two XLR-1/4" combo inputs, with two XLR loop-throughs
  • Pole receptacle accepts a SS3-BK or SS3-BK24 on the top panel
  • Multiple handles with comfort rubber grips for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar-plywood cabinets with tongue and groove joints
  • JBL's tour-proven DuraFlex finish
  • Cloth-backed, dent-resistant 16 gauge steel grilles

Tech Specs

Powered/Unpowered Powered
Power Configuration Mono-amped
LF Driver Size 18"
Total Power 1500W
Impedance 20K Ohms (balanced)
Frequency Range 35Hz-87Hz (±3dB)
Crossover Frequency 48dB/octave @ 90Hz
Maximum Peak SPL 134dB
Enclosure Material Poplar plywood
Mounting Options Floor, stack
Inputs 2 balanced female XLR/1/4" combo
Outputs 2 x XLR
Height 27.18"
Width 20.6"
Depth 28.5"
Weight 81 lbs

 

PRX 715X LF

 

JBL PRX715XLF Active Sub Woofer Speaker

The PRX715XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX715XLF performs with extreme efficiency and control

JBL PRX715XLF Active SUB Speaker Applications :
  • The PRX715XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX715XLF performs with exceptional efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.
  • The PRX715XLF is a high performance self-powered subwoofer system. The PRX715XLF is comprised of a powerful 2275H Differential Drive?dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL抯 tour proven DuraFlex?finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.
  • The amplifier input panel offers stereo inputs with XLR or ?inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

JBL PRX715XLF Active SUB Features :
  • 131 dB peak SPL
  • 15" Differential Drive?low-frequency driver for low-distortion and higher SPL
  • Efficient Class-D amplifier technology
  • DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
  • Integrated stereo pass-thru, with selectable HP filter, and polarity reverse
  • 2 x XLR-? combination inputs, with 2 x XLR loop-thru
  • Pole receptacle accepts a SS4-BK or SS4-BK24 on the top panel
  • Multiple handles with comfort rubber grips for easy transport
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL抯 tour proven DuraFlex檉inish.
  • Cloth backed, dent-resistant 16 gauge steel grilles
  • 131 dB peak SPL
  • 15" Differential Drive?low-frequency driver for low-distortion and higher SPL
  • Efficient Class-D amplifier technology
  • DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ

JBL PRX715XLF Active SUB Specs
  • Power Rating : 1500 W
  • Frequency Range (-10 dB) : 37 Hz - 113 Hz
  • Frequency Response (? dB) : 44 Hz ?91 Hz
  • Internal Crossover Frequency : 100 Hz DSP controlled 48 dB filter slope
  • Loop out Crossover Frequency : 120 Hz analog 24 dB filter slope
  • Maximum SPL : 131 dB
  • Signal indicators : Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
  • Signal: Green LED indicates signal present
  • Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
  • Dynamic Control (Input) : dbx Type IV?limiter circuit
  • Input Impedance : 20K Ohms (balanced)
  • Polarity : normal or reverse polarity
  • LF Driver : 1 x JBL 2275H 15 in woofer
  • Enclosure : Rectangular, 18 mm & 25mm, plywood
  • Transport : 2 x injection molded handles with backing cup
  • Finish : Obsidian DuraFlex?finish
  • Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
  • Input Connectors : Two Balanced female XLR/ 1/4" combo connectors
  • Output Connectors : Two balanced male XLR connectors.
  • Dimensions (H x W x D) : 547.1 mm x 445.0 mm x 580.0 mm (21.54 in x 17.52 in x 22.48 in)
  • Net Weight : 25.4 kg (56 lb.)

 

PRX735

 

15" Three-Way Full-Range Main System
The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

FEATURES
 
  • 136 dB peak SPL
  • 15" Differential Drive?low-frequency driver for low-distortion and higher SPL
  • 165 mm (6.5 in) horn loaded midrange transducer
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Normal and Boost user selectable EQ presets
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphones input capability
  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
  • Multiple injection molded handles with backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL抯 tour proven DuraFlex檉inish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

APPLICATIONS
 
  • This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX718XLF, complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
  • The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive?woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90?by 50?horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL抯 tour proven DuraFlex?finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 
    1000 lbs. each.
  • The amplifier input panel offers XLR or ?inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.

SPECIFICATIONS
 
Power Rating 1500 W
Frequency Range (-10 dB) Normal: 35 Hz ?20 kHz
Boost: 34 Hz ?20 kHz
Frequency Response (? dB) Normal: 42 Hz ?20 kHz
Boost: 39 Hz ?20 kHz
Coverage Pattern 90?x 50?nominal
Directivity Index (DI) 10.5 dB
Directivity Factor (Q) 11.2
Crossover Frequency 480 Hz, 2.0 kHz
Maximum SPL Normal: 136dB
Boost: 136dB
Signal indicators Limit: Yellow LED indicates peak output has been reached and dsp 
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio.
Dynamic Control (Input) dbx Type IV?limiter circuit
Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver 1 x JBL 275G 380mm (15 in) woofer
MF Driver 1 x JBL 196H 165mm (6.5 in) horn-loaded midrange transducer
HF Driver 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver"
Enclosure Trapezoidal, 18 mm, plywood
Suspension / Mounting 12 x M10 Suspension Points
Transport 2 x integrated handle with injection molded backing cup
Finish Obsidian DuraFlex?finish
Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connector 1 male XLR balanced output
Dimensions (H x W x D) 952.5 mm x 445.0 mm x 537.97 mm
(37.5 in x 17.52 in x 21.18 in)
Net Weight 34.9 kg (77 lb)

 

PRX725

 

Dual 15" Two-Way Full-Range Main System
The PRX725 is a self-powered, lightweight two-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

FEATURES
 
  • 139 dB peak SPL
  • Dual 15" Differential Drive?low-frequency driver for low-distortion and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Normal and Boost user selectable EQ presets
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphones input capability
  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
  • Multiple injection molded handles with backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL抯 tour proven DuraFlex檉inish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

APPLICATIONS
 
  • If a simple set-up is required and full bandwidth output at high levels is a must, then the PRX725 is most likely the optimum solution. With the same foot print as the PRX715, the dual 15" woofer design creates enough low frequency content to serve most live music or music playback situations. When coupled with a PRX subwoofer (or multiple subwoofers) the system becomes a high volume sound reinforcement solution, perfect for regional tour companies and AV Rental companies looking for a scalable, easy to employ audio solution. We recommend using the PRX718XLF in conjunction with the PRX725 as the extended low frequency capabilities of the subwoofer compliment the frequency response of the PRX725.
  • For live music, recorded music playback and speech the user has the option of tailoring the EQ. A microphones can be directly connected to the speaker input for quick on-the-fly PA applications.
  • The PRX725 is a self-powered, lightweight two-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX725 is comprised of two 380 mm (15 in) 275 Differential Drive?woofers, a 2408H-2, 37.5mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90?by 50?horn, all driven by a Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL抯 tour proven DuraFlex?finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of
    1000 lbs. each.
  • The amplifier input panel offers XLR or ?inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.

SPECIFICATIONS
 
Power Rating 1500 W
Frequency Range (-10 dB) Normal: 42 Hz ?18.5 kHz
Boost: 40 Hz ?18.5 kHz
Frequency Response (? dB) Normal: 49 Hz ?17 kHz
Boost: 46 Hz ?17 kHz
Coverage Pattern 90?x 50?nominal
Directivity Index (DI) 10.4 dB
Directivity Factor (Q) 11
Crossover Frequency 2.4 kHz
Maximum SPL Normal: 139 dB
Boost: 139 dB
Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp 
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio.
Dynamic Control (Input) dbx Type IV?limiter circuit
Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver 2 x JBL 275 (15 in) woofer
HF Driver 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
Enclosure Trapezoidal, 18 mm, plywood
Suspension / Mounting 8 x M10 Suspension Points, 1 x M10 pull back point
Transport 2x integrated handle with injection molded backing cup
Finish Obsidian DuraFlex?finish
Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors 1 male XLR balanced output
Dimensions (H x W x D) 1070.36 mm x 445.0 mm x 537.97 mm
(42.14 in x 17.52 in x 21.18 in)
Net Weight 37.19 kg (82 lb.)

 

PRX715

 

15" Two-Way Full-Range Main System/Floor Monitor
The 2-way 15" is the most recognizable form of portable PA loudspeakers and offers the perfect balance between size and performance. The PRX715 truly is an exception; it抯 small, light weight, versatile and powerful.

FEATURES
 
  • 136 dB peak SPL
  • 15" Differential Drive?low-frequency driver for low-distortion and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Optimized EQ for monitor or front-of-house applications
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphones input capability
  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
  • Multi-angle enclosure for main PA or floor monitor applications
  • Integrated 36 mm pole mount socket with angle down tilt
  • Injection molded handle with backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL抯 tour proven DuraFlex檉inish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

APPLICATIONS
 
  • The 2-way 15" offers the perfect balance between size and performance. The PRX715 truly is an exception; it抯 small, light weight, versatile and powerful. The performance and asymmetrical design make this a perfect choice for musicians, entertainers and DJ抯 when portability is key, or when hung by the suspension points, an exceptional light-duty installation speaker. All PRX700 Series speakers were designed to excel in sound reinforcement where challenging audio environments and loud volumes are the norm. For applications requiring full bandwidth sound reproduction, the PRX715 delivers the optimum balance. For live music, recorded music playback and speech the user has the option of tailoring the EQ. A microphones can be directly connected to the speaker input for quick PA applications. Coupled with a PRX700 sub-woofer the system becomes an efficient, full-range sound system.
  • The PRX715 is comprised of 15" 275G Differential Drive?woofer, a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90?by 50?horn, all driven by 1500 watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL抯 tour proven DuraFlex?finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of
    1000 lbs. each.
  • The amplifier input panel offers XLR or ?inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.

SPECIFICATIONS
 
Power Rating 1500 W
Frequency Range (-10 dB) Main: 42.9 Hz - 19.5 kHz
Monitor: 43.6 Hz - 19.3 kHz
Frequency Response (? dB) Main: 58.1 Hz - 17.2 kHz
Monitor: 60.7 Hz - 16.7 kHz
Coverage Pattern 90?x 50?nominal
Directivity Index (DI) 10.2 dB
Directivity Factor (Q) 10.4
Crossover Frequency 1.7 kHz
Maximum SPL Normal: 136 dB
Boost: 136 dB
Signal indicators Limit: Yellow LED indicates peak output has been reached and dsp 
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio.
Dynamic Control (Input) dbx Type IV?limiter circuit
Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver 1 x JBL 275G (15 in) woofer
HF Driver 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
Enclosure Asymmetrical, 18 mm, plywood
Suspension / Mounting Dual 36 mm pole socket, 12 x M10 Suspension Points
Transport 1 x injection molded handles with backing cup
Finish Obsidian DuraFlex?finish
Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors 1 male XLR balanced output
Dimensions (H x W x D) 714.43 mm x 445.13 mm x 358.71 mm
(28.13 in x 17.52 in x 14.12 in)
Net Weight 21.6 kg (47.5 lb.)

 

PRX712

 

12" Two-Way Full-Range Main System/Floor Monitor
PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.

FEATURES
 
  • 135 dB peak SPL
  • 12" Differential Drive?low-frequency driver for low-distortion and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Optimized EQ for monitor or front-of-house applications
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphones input capability
  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
  • Multi-angle enclosure for main PA or floor monitor applications
  • Integrated 36 mm pole mount socket with angle down tilt
  • Injection molded handle with backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL抯 tour proven DuraFlex檉inish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

APPLICATIONS
 
  • PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer, offering a high performance self-powered sub/sat system.
  • The PRX712 is comprised of a 12" Differential Drive?woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90?by 50?horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL抯 tour proven DuraFlex?finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of
    1000 lbs. each.
  • The amplifier input panel offers XLR or ?inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

SPECIFICATIONS
 
Power Rating 1500 W
Frequency Range (-10 dB) Main: 44.8 Hz ?19.6 kHz
Monitor: 44.8 Hz ?19.5 kHz
Frequency Response (? dB) Main: 55.7 Hz ?18.2 kHz
Monitor: 56.5 Hz ?17.7 kHz
Coverage Pattern 90?x 50?nominal
Directivity Index (DI) 10.2 dB
Directivity Factor (Q) 10.4
Crossover Frequency 1.8 kHz
Maximum SPL Normal: 135 dB
Boost: 135 dB
Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp 
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio.
Dynamic Control (Input) dbx Type IV?limiter circuit
Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver 1 x JBL 272G 305mm (12 in) woofer
HF Driver 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
Enclosure Asymmetrical, 18 mm, plywood
Suspension / Mounting Dual 36 mm pole socket, 12 x M10 Suspension Points
Transport 1 x injection molded handles with backing cup
Finish Obsidian DuraFlex?finish
Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors 1 male XLR balanced output
Dimensions (H x W x D) 612.394 mm x 384.556 mm x 341.376 mm
(24.11 in x 15.14 in x 13.44 in)
Net Weight 19.4 kg (42.5 lb.)

 

PRX710

 

10" Two-Way Multipurpose Self-Powered Sound
Reinforcement System
PRX710 is a compact and ultra-lightweight speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size.

FEATURES
 
  • 133 dB peak SPL
  • 10" low-frequency driver for low-distortion and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Normal and Boost user selectable EQ presets
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphones input capability
  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
  • Integrated 36 mm pole mount socket
  • Integrated handle with injection molded backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL抯 tour proven DuraFlex檉inish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

APPLICATIONS
 
  • The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub/sat system.
  • The PRX710 is comprised of a 10" woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100?by 60?horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL抯 tour proven DuraFlex?finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of
    1000 lbs. each.
  • The amplifier input panel offers XLR or ?inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

SPECIFICATIONS
 
Power Rating 1500 W
Frequency Range (-10 dB) Normal: 50 Hz ?19.6kHz
Boost: 42.9 Hz ?20kHz
Frequency Response (? dB) Normal: 63.5 Hz ?18.5kHz
Boost: 53 Hz ?18.6kHz
Coverage Pattern 100?x 60?nominal
Directivity Index (DI) 9 dB
Directivity Factor (Q) 8
Crossover Frequency 1.9 kHz
Maximum SPL 133 dB
Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio, 
Red indicates system has power but is in a power saving mode and will not 
pass audio.
Dynamic Control (Input) dbx Type IV?limiter circuit
Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver 1 x JBL M110-4 250mm (10 in) woofer
HF Driver 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver
Enclosure Trapezoidal, 18 mm, plywood
Suspension / Mounting single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point
Transport 1 x integrated handle with injection molded backing cup
Finish Obsidian DuraFlex?finish
Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors 1 male XLR balanced output
Dimensions (H x W x D) 498.7 mm x 335.6 mm x 322.3 mm
(19.63 in x 13.21 in x 12.69 in)
Net Weight 16.4 kg (36 lb)

 

CopyRight © 2005-2019,All rights reserved.成都AG8亚游商貿有限公司 版權所有
聯係電話:028-86786315 13488949889 13198595297 地址:成都太升南路錦天國際288號C棟904號
蜀ICP備06002856號  [網站管理]
成都AG8亚游商貿有限公司提供專業舞台燈光音響設計及演唱會設備出租。